Buy PocketWizard ST4 Power Receiver for Elinchrom RX Flash Units (Black)PocketWizard ST4 Power Receiver for Elinchrom RX Flash Units (Black) Product Description:
- Uses All PocketWizard Channels: The PowerST4 can be programmed as needed with up to 20 ControlTL channels for Manual Power Control, or 32 standard channels for simple triggering.
- Programmable and Upgradeable: Use the PocketWizard Utility with the PowerST4's USB port to program the receiver to any PocketWizard channel and zone.
- Manual Power Control: When the PowerST4 is paired with either the MiniTT1 or FlexTT5 on camera
- Use the AC3 ZoneController to control up to three zones of light with as many lights in each zone as you want. Use the A-B-C zone switch on the PowerST4 to assign the zone.
- HyperSync: HyperSync allows achieving faster X-sync speeds, as fast as 1/8000 second, with full power flash to better freeze action and use wide apertures in bright ambient-light conditions.
Product Description
The PowerST4 Receiver enables remote power control of Elinchrom RX flashes with a camera-mounted PocketWizard MiniTT1 Transmitter or FlexTT5 Transciever. PocketWizard ControlTL technology allows you to control the flash power level using the camera’s Flash Exposure Control (FEC). The PowerTracking feature automatically adjusts flash power to maintain the photographer-established level and thus proper exposure when the aperture and/or ISO is changed. Slide the new PocketWizard AC3 ZoneController into the shoe of the camera-mounted MiniTT1 or FlexTT5 and ST4 linked Elinchrom RX flashes can be controlled in three zones: A, B, and C in 1/3-stop increments over a six-stop range. The ST4 can also receive standard PocketWizard signals from a Plus, Plus II and MultiMAX transmitter. Set for Channel 1 at the factory, the ST4 can be easily set for any of the 20 ControlTL or 32 standard channels using the units' LEARN function or by USB connection with the PocketWizard Utility software. The PowerST4 draws its power directly from the Elinchrom RX flash remote control socket; there’s no need to install or replace batteries. The PocketWizard PowerST4 is a must-have for Canon photographers using PocketWizard with Elinchrom RX flash units.
Customer Reviews
Most helpful customer reviews
0 of 0 people found the following review helpful.
By zennot
It is hard to set up, but great using after it.But it is more useful if you get more than one.
0 of 0 people found the following review helpful.
By Jeff R Bottari
I have been completely satisfied since I ordered my Pocketwizard ST4 Power Receiver for Elinchrom RX. I have been using it on my Elinchrom Ranger RX and could not be happier. I used to use a Pocketwizard Multimax attached to an Elinchrom sync to mini which would always flop around and be a pain trying to keep from swinging everywhere. This ST4 Power receiver makes life easy and compact shooting with my Ranger unit. You just need to have the Elinchrom Skyport adapter and you're ready to. I didn't even need to update the firmware but the Pocketwizard utility gives me the option to once another update comes out.Thanks Amazon for saving me a few dollars!
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
